NEW high capacity GrainVAC Series MAKES LOADING GRAIN FAST AND EASY!
Click here to view a brochure on VAC VR12 Specifications
High Capacity
Testing shows that results may vary based on conditions.
Up to 10,000 bushels per hour (approx 273 tonnes per hour) during full bin load out
4,000 – 5,000 bushels/hour (approx 109 – 136 tonnes per hour) with 50 feet of hose at full bin load-out
5,500 bu/hr (approx 150 tones per hour) with 35 feet of hose attached
directly to an 8 inch bin sump at full-bin load-out
Low Noise
Specially engineered airflow technology dramatically reduces the noise volume and pitch
Automatic Air Throttle
Minimizes tractor lug-down and increases tractor efficiency.
The airflow virtually stops when the hose is removed from the grain
The suction automatically resumes when hose is placed in the grain
Auger
Unfolds right next to the bin
16’ auger clearance large trucks and grain carts.
Hi Flow directional or removable dust exhaust
Swivel action allows you to adjust the exhaust direction
Compact hose storage
55’ (16.8 m) of hose and attachments are standard equipment
Seed Quality: Independent tests by grain elevators indicate that the Rem Grain VAC causes less damage to valuable seed than conventional vacuum systems where high speed airlocks are used. The unique drum and exhaust design separates dust and foreign matter from the grain, thereby improving the quality of the material that you deliver.
Tachometer and hour meter to ensure the PTO is running at the recommended speed and to monitor the operational hours of the GrainVAC.
Rubber Torsion axles for high speed towing
SPECIFICATIONS:
Transport Position
NEW! Narrow Width – 92” (7.6’) (2.34 m)
Height – 98” (2.49 m)
Weight – 4300 lbs. (1955 kg)
Hitch Weight – 480 lbs. (218 kg
During Operation
Auger Extension angle – 45 degrees
Auger Discharge height – 16’ (4.87 m)
PTO – 1000 RPM
Hydraulic requirements – 2100 psi, @ 2GPM flow rate
Horsepower requirement – 140-180 HP at 1000 PTO rpm to operate at maximum capaciy
STANDARD FEATURES:
1 – Galvanized Steel Flexible Hose 8” x 3’ (20 cm x .9 m)
2 – Galvanized Steel Flexible Hoses 8” x 8’ (20 cm x 2.4 m)
2 – Aluminium Pipes 8” x 8’ (20 cm x 2.4 m)
1 – Aluminium Pipe 8” x 5’ (20 cm x 1.5 m)
1 – Flexible Rubber Clean-up Hose 8” x 6.8’ (20 cm x 2.1 m)
1- 7” Floor Sweep 7” (18 cm)
1 – Reducer 8” – 7” (20 cm – 18 cm)
3’ telescoping tube floor sweep 8” x 3’ (20 cm x.9 m)
Acrylic Viewing Portal 5” (13 cm)
Tires – ST 235/80R16
1000 PTO Shaft
Hour Meter and Tachometer
NEW! Easy Access Lower Auger Clean Out Door
NEW! Exhaust System
Poly Wear liners in high-stress areas
Torflex axles – smoother riding and faster towing speeds
Inlet height 38” from ground while positioned at the bin.
Heavy duty gearbox and drive-line components.
Gearbox guard and shear sprocket guard now hinged and removable, no wrenches required.
VAC V12DVAC VRX
Due to continuing research and development on design and manufacturing procedures, technical data and specifications are subject to change without notice.
Click here to view a brochure on VAC VR12 Specifications
The same impressive features of the VR12 Plus….
Cummins Diesel Motor
Trailer
3 Tonne Capacity
Independent
Led Lighting
Electric Brakes
Digital
Lighting Kit
OPTIONS
Mechanical
Digital
Digital Plus Satellite Tracking
Digital Plus Satellite Tracking (Truck Mounted)
Due to continuing research and development on design and manufacturing procedures, technical data and specifications are subject to change without notice.
Click her to view a brochure on GrainVAC VRX Specifications
NEW! Heavy-Duty Auger Bearing Mounts: The middle auger bearing mounts are heavy-duty to support the weight of the auger and the material moving through during operation. Auger bearing mounts are a single leg bearing support.
NEW! Lower Noise: Specially engineered airflow technology dramatically reduces the noise volume and pitch.
NEW! “Locked in place” Rotor Assembly: Rotators come locked in the proper position from the factory. Rotor is held in place with a lock nut. When you have to replace the rotor or bearings there is no need to make adjustments to get the proper clearance between the rotor and the inlet plate. This design allows the rotor assembly to only be in one place.
NEW! Unique Auger Design: Fold and unfold adjacent to the bin. 10″ discharge. 16′ Clearance. Protected upper auger bearing.
NEW! Hassle Free Machined Fit: Hassle free machined fit between the rotary screen and rotor inlet plate. No more seals to replace between screen and fan.
NEW! Modular Directional Exhaust: Swivel action allows you to adjust the exhaust direction. Modular components – purchase optional components to adjust the direction & the length of the exhaust.
NEW! Rear Idler Assembly: Engineered for fewer moving parts and less maintenance.
NEW! High Flow Discharge: Single door allows for tighter air seal.
Capacity: Up to 6000 bushels per hour during full bun load out. Note: results may vary, particularly in clean up, where speed depends on the hose type and operating conditions. Hose configuration is important for optimising maximum capacity: use the stainless steel flex hoses and aluminum pipes first and the flexible rubber hose when necessary. Use the bin load out nozzle for full bin load-out and the floor sweep or vac nozzle for final clean up operations.
Due to continuing research and development on design and manufacturing procedures, technical data and specifications are subject to change without notice.